BVXJZ - DENTLITE BODY FILLER, A631

Product Identification

Product ID:DENTLITE BODY FILLER, A631
MSDS Date:10/25/1991
FSC:8030
NIIN:00N054043
MSDS Number: BVXJZ

Responsible Party
FIBRE GLASS-EVERCOAT CO INC
6600 CORNELL RD
CINCINNATI, OH 45242
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 800-729-7600

Preparer: JEFF ZYCH

Cage: 18731

Contractor
FIBRE GLASS-EVERCOAT CO INC
CINCINNATI, OH 45242 US

Telephone: 513-489-7600

Cage: 18731

Ingredients

5 @ 68F.

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 19.18%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM;100 STEL, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


POLYESTER RESIN

Fraction By Weight: 30%

OSHA PEL N/K

ACGIH TLV: N/K


TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC (NON

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 40%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST


GLASS MICROBALLONS; (HOLLOW GLASS SPHERES)

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K


0

RTECS: 9999999VO

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:VAPORS MAY CAUSE NOSE, THROAT &
RESPIRATORY TRACT IRRITATION. HIGH CONCENTRATION MAY CAUSE HEADACHE
& NAUSEA. REPEATED HIGH CONCENTRATION EXPOSURE MAY CAUSE LIVER &
KIDNEY DAMAGE. SKIN CONTACT:P ROLONGED OR FREQUENT CONTACT MAY
CAUSE DEFATTING, DRYNESS W/IRRITATION & POSSIBLE DERMATITIS. (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:STYRENE:IARC MONOGRAPHS, SUPPLEMENT, VOL
7, PG 345, 1987:GROUP 2B. ANIMAL:NERVOUS SYSTEM.
Effects of Overexposure:HLTH HAZ:EYE CONTACT:MAY CAUSE TEARING &
IRRITATION. SKIN ABSORPTION:DERMATITIS & IRRITATION. INGEST:MAY
CAUSE GASTROINTESTINAL DISTURBANCES, PAIN & DISCOMFORT.
Medical Cond Aggravated by Exposure:LIVER & KIDNEY DISORDERS.

First Aid

First Aid:SKIN:WASH W/SOAP & WATER. EYES:FLUSH W/WATER FOR AT LEAST 15
MINUTES & GET MEDICAL ATTENTION. INHAL:REMOVE VICTIM FROM EXPOSURE.
IF UNCONSCIOUS GIVE ARTIFICIAL RESPIRATION OR OXYGEN AS NEEDED. GET
MED ICAL ATTENTION. INGEST:DO NOT INDUCE VOMITING (ASPIRATION
HAZARD). GET MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:CC
Flash Point:96.0F,35.6C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:POLYMERIZATION MAY TAKE PLACE AT ELEVATED
TEMPERATURE SUCH AS IN A FIRE. IF CONTAINED, VIOLENT RUPTURE MAY
RESULT.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION. ABSORB SPILL
W/ABSORBENT MATERIAL SUCH AS VERMICULITE OR SAND.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID STORAGE ABOVE 100F. STORE ONLY
IN ORIGINAL CONTAINERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:A NIOSH/MSHA APPROVED CANISTER TYPE RESPIRATOR
MUST BE WORN TO PREVENT THE INHALATION OF VAPORS OR SPRAY MISTS
WHEN THE TLV OR PEL IS EXCEEDED. WEAR A NIOSH/MSHA APPROVED DUST
MASK WHEN SANDING THE CU RED PRODUCT.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL &/OR LOCAL EXHAUST)
VENTILATION TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:PLASTIC OR CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL GOGGLES & FACE SHIELD.
Other Protective Equipment:USE A BARRIER CREAM SUCH AS GLOVE COAT WHEN
USING THE PRODUCT.
Work Hygienic Practices:REMOVE & WASH CONTAMINATED CLOTHING. WASH HANDS
BEFORE EATING & DO NOT SMOKE WHILE USING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:SEE ING 1
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.2
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:PASTE; SHARP AROMATIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT & DIRECT SUNLIGHT.
Hazardous Decomposition Products:HEATING TO DECOMPOSITION MAY CAUSE
IRRITATION ACRID FUMES.
Conditions to Avoid Polymerization:IF HAZARDOUS POLYMERIZATION OCCURS
WHILE CONTAINED IN A CLOSED CONTAINER, VIOLENT RUPTURE MAY RESULT.

Disposal

Waste Disposal Methods:SMALL QUANTITIES CAN BE REACTED W/APPROPRIATE
HARDNER TO SOLIDIFY. DISPOSE OF I/A/W ALL FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.